Table Lamps, Floor Lamps, Pendant Lighting Fixtures

Lighting Fixtures & Lamps Blog

Lighting Fixtures & Lamps Questions Answered

 

Archive for the ‘Questions on Wall Sconces / Wall Lighting’ Category

Kenroy outdoor wall sconce back plate and glass dimensions

Monday, May 5th, 2008

Hello. I am interested in ordering two of these Kenroy Boulder Transitional Outdoor Wall Sconce - KR-70281-COP / Kenroy Boulder Transitional Outdoor Wall Sconce - KR-70282-COP but I am a little confused about their dimensions. Both are pictured on your website. However, the image used to illustrate both sizes is the same. The smaller one (KR-70281: dimensions 11″ x 7″ with glass 4″) appears proportionate to the picture provided, but the larger one (KR-70282: dimensions 16″ X 7″ with glass 6″) appears out of proportion if the stated dimensions on your website are correct. The smaller lamp seems too small for my particular application (Over two garage doors) so I am considering ordering the larger one. Could you please provide me with more detail on the dimensions of these two lamps before I order them? Specifically, I would like to know the following:

1. Exact dimensions of the back slate plate for the two lights.
2. exact height and width of the blown glass shades for the two lights from Kenroy.

Also if you could provide a picture of both outdoor lighting fixture, that would be very helpful to me in ordering the right one. The stated overall dimensions of one of these two lights just seem off to me, especially the larger one at 16″ X 7″. Thank you very much.

Answer: The dimensions of the backplate for model KR-70281 - outdoor wall sconce are 9.5″L x 4.25″W. The glass is 4.25″ square x 5.9375″H.

The dimensions of the backplate for model KR- 70282 - outdoor wall sconce are 13″L x 6.1875″W and the glass is 6″ sqaure by 8.625″H

Progress lighting outdoor wall sconce material used

Tuesday, April 29th, 2008

I am considering Progress Lighting Polymeric Cylinders Transitional Outdoor Wall Sconce - PG-P5712. Can you confirm the material - is it plastic? If not, what is it made of?

Answer: This wall sconce material is indeed polycarbonate, or plastic. We have confirmed this information with Progress Lighting - the manufacturer.

Kenroy swing arm wall sconce cord cover

Friday, April 25th, 2008

Product description states that this Kenroy Nathaniel Swing Arm Transitional Wall Sconce - KR-30130-PB comes with a cord cover? Is the cord cover polished brass? How long is the cord cover?

Answer: We just found out that this wall sconce from Kenroy is currently backordered until approx. May 5th. The cord cover is also polished brass finish and is approx. 6 feet long.

LBL lighting outdoor wall sconce ballast

Friday, April 18th, 2008

I would like to order LBL Lighting EKO 18/G Outdoor Wall Sconce / Ceiling Light - EKO-18-G 13W black compact fluorescent model. I’m not sure what a ballast is and would like to ask for the differencee between a magnetic and an electronic ballast?

Answer: The magnetic ballast has a copper coil so there is less chance of buzzing. The electronic ballast may buzz after some time. Also, if you would like to apply a dimmer then it is recommended to go with a magnetic because electronic dimmers are much pricier.

We found a website that has some pretty good explanations of the basics between electronic and magnetic ballasts. http://www.ace-ballast.com/articles/?id=Frequently_Asked_Ballast_Questions

Maxim lighting wall sconce dimension

Thursday, April 10th, 2008

The web page says that the width of this Maxim Lighting Pacific Traditional Wall Sconce - MX-8026-MR is 13″. That seems rather wide for a wall sconce light, is that value right? I am seeking bathroom lights to be placed at the sides of a mirror and there’s not much room, maybe 6 or so inches each side. Is it possible that the height and width values have been reversed?

Answer: We have verified that the dimensions of this wall sconce from Maxim Lighting are as follows W: 13″ H: 5″ Ext: 8″. It is a pretty wide fixture. However, we think we may have a good solution because another manufacturer called Access Lighting has a wide selection of more slender wall sconces that could better suit your application in the bathroom.

Please see the link provided below to view the Access Lighting selections: http://www.arcadianlighting.com/access-lighting-wall-sconces.html

On/Off switch for wall sconces inquiry

Tuesday, March 25th, 2008

Hi. I was wondering if this Meyda Tiffany Lucerne Traditional Wall Sconce - MD-80111 comes with an on/off switch on the base. Would you also be able to tell me if any of your wall sconces come with on/off switches?

Answer: Per Meyda Tiffany - the manufacturer, Model# MD-80111 does not have an on/off switch on the base. This wall sconce is hardwired onto the wall.

There are some wall sonces that have rotary dimmers. Most of them are contemporary in style. We found it difficult to isolate any wall sconces with on/off rotary switches etc. Thus, if you would like to look through the different selections and email us with model numbers, we can verify whether or not the rotary switch is available.

A particular line that does have the rotary switch is Besa Lighting. Please see the link provided: http://www.arcadianlighting.com/besa-divi-wall-1wu.html

Meyda tiffany 1-light wall sconce

Thursday, March 20th, 2008

Do you have this Meyda Tiffany Prairie Wheat 2-Light Wall Sconce - MD-31247 in a single light version?

Answer: Yes. The 1-light version of this wall sconce from Meyda Tiffany is model MD-25894 , which is not on our website yet. Your cost will be $85.

On/off switch for designers fountain wall sconce

Tuesday, March 18th, 2008

I read on your site that some wall sconces can have an on /off switch installed by the manufacturer. Is this Designers Fountain Nottingham Traditional Wall Sconce - DF-94901-TU can have that feature added?

Answer: Unfortunately, this Designers Fountain item is not customizable to have an on /off switch.

Kenroy swing arm wall sconces back plate dimensions

Monday, March 3rd, 2008

I need to know the size of the plate that goes on the wall for the following :

Answer: The dimension of the back plate for these wall sconces are as follows:

  • Nathaniel Swing Arm Transitional Wall Sconce - 3.5″ W x 7″ H x 3.5″ thickness
  • Wentworth Swing Arm Traditional Wall Sconce - 1.38″ W x 6.25″ H
  • Simplicity Swing Arm Transitional Wall Sconce - 3″ W x 4″ H x 3.25″ thickness

Progress lighting wall sconce availability

Wednesday, February 27th, 2008

Is Progress Lighting Fransisca Traditional Wall Sconce - PG-P2914-04 still available? I need 2 pcs of this wall sconce.

Answer: Yes. Progress Lighting still have these items in stock in the Chicago warehouse, and we can get them for you. It will be about 1 week before the items are shipped from Chicago warehouse to you directly.

Kenroy wall sconce cord cover

Tuesday, February 26th, 2008

Does the Kenroy Wentworth Swing Arm Traditional Wall Sconce - KR-33054-BBZ include a cord cover?

Answer: Yes. This wall sconce from Kenroy comes with a cord cover. Item is in stock and can shipped out this week.

Kenroy wall sconce lamp shade

Monday, February 25th, 2008

What is the true color of the shade for this Kenroy Simplicity Swing Arm Transitional Wall Sconce - KR-30110-BRZ?

Answer: This Kenroy wall sconce lamp shade color is natural fiber (cream). If you have any other questions, please don’t hesitate to contact us.