Nora Track Light Connectors
I ordered some Nora Lighting track lights a few months ago. I need to purchase some more track and lights to make a complete closed square. It is a one circuit track. I know I am missing a L connector (NT-313). What do I need to finish this project?
Answer: I am not sure if you are still planning to use the floating canopy that you currently have. Do you use the floating canopy to cover any holes in your ceiling? If not, then I assume that you can get 2 pcs of the track light L-Connectors to make it a closed loop on the square. For the single circuit, it’s the model number NT-313 for the L-Connector. On one of the 4 L-connectors that you’ll have total, it will be served as a power feed, which you will need to remove the 2 wires on the inside so it’s not conductive to cause a short. Then the electrician will use one end of that same L-connector as a power feed and the other end like an “end cap” to close the square loop. You will also need to order the right size of the track. If you need the 8 foot track, I would recommend that you get 2 pcs of the 4 foot track and 1 pc of the straight conductive track light connector. Otherwise, freight for 8 foot track is quite expensive.Â