Question regarding Dabmar path light (LV-61)
We are replacing existing 12V (2-wire) path lights, so we already have a transformer. Do we need to order anything additional or can we just remove our existing path lights and replace them with this Dabmar LV-61 Path Light – LV-61 using the same wiring? Can we bury them partly into the dirt? A few inches deep so the bottom of the diffuser is maybe one inch above the dirt? Also, we want low subtle lighting. If we find the 20W lamps too bright, what other wattage lamp options can we use?
Answer: We believe you should be able to use the old wiring and just replace the fixtures. However, please keep in mind that electrical wires tend to wear out over time, so we recommend that you check with your electrican the condition of these wires. This path light from Dabmar (the manufacturer) is made of spun brass material. It is recommended that you don’t burry the fixture so low as you mentioned, because the damp ground soil will “eat” through the spun brass material and results in holes on the fixture. You can always change out the lamps to 10W later if you find the 20W too bright. The 10W 12V JC type Halogen lamps are widely available at local hardware store. Otherwise, the fixture comes with 20W lamps.