Tech lighting monorail lighting inquiry
Does the Tech Lighting FreeJack Recessed Can Adapter Canopy - 700FJRCAD power a monorail fixture. If so, what other parts would be required to do a 5′ monorail with three hanging pendants (in bronze finish). Also are pendants interchangeable as long as the power is consistent from one brand to the next?
Answer: Recessed can adapter - #700FJRCAD from Tech lighting does not fit for a monorail configuration. This item is for a free mounting pendant light, or similar fixture with a freejack adapter. For a monorail system you might want to try the following canopies:
700MOP4C02 - 4” Round Single-Feed Canopy
700MOSRT15D - 150W Surface Transformer Single-Feed Canopy
700MOSRT30D - 300W Magnetic Surface Transformer Single-Feed Canopy
700MOSRT324D - 300W 24V Magnetic Surface Transformer Single-Feed Canopy
700MOSRT60D - 600W Magnetic Surface Transformers Dual-Feed
The above mentioned canopies will all work for powering a monorail lighting application. Basically, all of the parts you need to mount pendants to a rail are as follows:
1. Power Canopy
2. End Caps
3. Monorail
4. Power Stem
5. Unpowered ceiling connectors
6. Pendant Lights
7. Freejack adapters for rail system
Monorail kits are available which provide you the hardware in a package:
700MOKTS300 - 300W Surface Transformer Single circuit Monorail Mounting Kit
700MOKTS150 - 150-Watt Single Circuit Monorail Kit
700MOKTA300 - 300-Watt REMOTE Transformer Single Circuit Monorial Kit